How to Clean Hardwood Floors: Safe Routine, Cleaners and What to Avoid

Clean walnut hardwood floor in a Kirkwood home, showing how to clean hardwood floors

Short answer: to clean hardwood floors, sweep or vacuum regularly with a hard-floor setting, then damp mop (never wet mop) with a cleaner made for wood floors. Use a well wrung-out microfiber mop, wipe up spills quickly, and keep steam mops off the floor. Check your floor manufacturer's care instructions first, because the right product depends on your floor's finish.

Your hardwood floor cleaning routine

How oftenWhat to do
Daily or as neededDry sweep or dust mop high-traffic areas, and wipe up spills right away.
WeeklyVacuum on the hard-floor or bare-floor setting, then damp mop with a wood-floor cleaner.1
Every few monthsMove furniture, clean edges and corners, and check felt pads for wear.
When the finish looks dull or wornAsk a pro about a recoat or refinish (see below).

A NWFA-based care guide recommends dry sweeping frequently and vacuuming on a bare-floor setting weekly, and notes that a vacuum's beater bar can scratch the finish, so turn it off or use a hard-floor attachment.1

How to clean hardwood floors step by step

  1. Remove dust and grit first. Sweep with a soft broom, use a dust mop, or vacuum with a hard-floor head. Grit is the main thing that scratches a wood floor, so do not skip this step before mopping.
  2. Choose the right cleaner. Use a cleaner made for your type of wood floor. Guides generally recommend a pH-neutral wood-floor cleaner and say to avoid products made for vinyl or tile.1 Your floor manufacturer's care page is the best place to confirm what is approved.2
  3. Lightly dampen a microfiber mop. Spray a small amount of cleaner on the mop pad or the floor, then wring out the mop until it is just damp. Standing water is what damages wood.
  4. Mop with the grain. Work in small sections along the direction of the boards.
  5. Dry the floor. Wipe up any moisture with a dry cloth or a dry mop pad so nothing sits on the surface or in the seams.
  6. Let it air dry before walking on it. Use a fan if the room is humid.

What not to do when cleaning hardwood floors

  • Do not use a steam mop. Manufacturer care guides for engineered and solid wood floors, including Bruce and Mohawk, tell owners not to clean with steam, and Bruce warns that water or steam can permanently damage the floor and may void the warranty.23
  • Do not flood the floor. Mohawk advises against flood mopping, since mop water can damage the flooring and leave spots.3
  • Do not use harsh or abrasive products. Skip scouring pads, bleach and cleaners made for other floor types.
  • Do not use a vacuum with the beater bar on. It can scratch the finish.1
  • Do not drag furniture or wear cleats and heels indoors. Use felt pads and lift furniture instead of sliding it.
  • Do not leave spills. Blot liquid right away, because water that sits can stain or damage the wood.

Can you clean hardwood floors with vinegar?

You will find a lot of advice online to mop hardwood with vinegar and water. The guidance is not consistent. Some manufacturer care sheets allow a diluted vinegar solution for occasional use on certain floors, while other manufacturers and flooring retailers tell owners to avoid vinegar and homemade mixes, and some floors need a specific cleaner to keep the warranty valid.23 Vinegar is acidic, so we lean toward the safer route of using a cleaner made for wood floors, and testing anything new in a hidden spot first. If you want to use vinegar, check your floor manufacturer's instructions for your exact product.

How to clean engineered hardwood floors

Engineered hardwood has a thin real-wood top layer over layered plywood or fiberboard, so moisture matters even more. Follow the same routine: sweep or vacuum, then damp mop lightly with a manufacturer-approved cleaner. Avoid steam and standing water, because moisture can work into the seams and separate layers.3 See our engineered hardwood flooring page for more.

Cleaning wax-finished and oil-finished floors

Most newer hardwood floors have a surface finish such as polyurethane, which is sealed and easy to damp mop. Floors with a wax or penetrating oil finish are different. They need different cleaners and routine care, and some manufacturers warn that their standard floor cleaner is not for wax finishes.2 If you are not sure what finish your floor has, ask a flooring pro before you clean it.

How to remove common hardwood floor messes

  • Sticky spots and food: let them soften with a barely damp cloth, lift gently, then wipe dry. Do not scrub hard.
  • Pet accidents: blot up right away, wipe with a lightly dampened cloth, and dry. Urine that sits can stain wood and damage the finish.
  • Mud and salt: sweep or vacuum first, then damp mop. Winter road salt leaves white residue, so use mats at entrances.
  • Scuffs: often wipe away with a clean dry cloth. For deeper marks, see our guide to wood floor scratch repair.
  • Squeaks and gaps: these are not cleaning problems. See how to fix squeaky floors and gaps in hardwood floors in winter.

How to keep hardwood floors clean longer

  • Put mats at every door and a rug where people kick off shoes.
  • Take shoes off at the door when you can.
  • Put felt pads under furniture and replace them when they flatten.
  • Keep pet nails trimmed.
  • Vacuum or sweep often, since grit acts like sandpaper.
  • Keep indoor humidity steady to protect the wood and the finish.

More daily habits are in our guide to everyday habits that keep your floors beautiful.

When cleaning is not enough

If your hardwood floors look dull even after cleaning, show worn paths, or have scratches through the finish, the finish may be worn out rather than dirty. A recoat or a full refinish can bring them back. Our guides explain whether you need a recoat or a full refinish and how to tell when your floors need refinishing. You can also see our hardwood refinishing service.

Frequently asked questions

What is the best way to clean hardwood floors?

Sweep or vacuum first, then damp mop with a cleaner made for wood floors and a well wrung-out microfiber mop. Dry any moisture and avoid steam and standing water.

How often should you clean hardwood floors?

Sweep or dust mop as needed, and vacuum and damp mop about once a week, adjusting for traffic, pets and weather.1

Can you use a steam mop on hardwood floors?

Manufacturers generally say no. Steam and moisture can damage the finish and the wood and may void the warranty.23

Is vinegar safe for hardwood floors?

Manufacturer guidance differs, and some floors need an approved cleaner to keep the warranty valid. Using a wood-floor cleaner and checking your manufacturer's care guide is the safer choice.

What should I use to clean hardwood floors naturally?

Plain dry cleaning (sweeping, dust mopping and vacuuming) is the gentlest option. For mopping, use a damp microfiber mop with a cleaner approved for your floor.

How do you clean old hardwood floors?

Use the same gentle routine. If the finish is worn through, cleaning will not restore it, and a recoat or refinish is usually the answer.

How do you make hardwood floors shiny again?

Clean them first to remove film and grime. If they are still dull, the finish may be worn, and a professional recoat can restore the shine.

Need help with your hardwood floors?

Request a free estimate or call Kelly's Flooring at (636) 677-5555. We are a family-owned flooring store at 2311 Little Antire Rd in High Ridge, Missouri, serving the St. Louis area since 1978. We can tell you whether your floors need a better cleaning routine, a recoat or a full hardwood refinish.

Sources and method

  1. "NWFA Guidelines: Care and Maintenance" (2024), a National Wood Flooring Association care guide as posted by a flooring dealer, on sweeping, bare-floor vacuuming, damp mopping and cleaner choice. PDF
  2. Bruce, "Hardwood Floor Care Tips," a manufacturer care page covering approved cleaning, water and steam, and wax-finish floors. bruce.com
  3. Mohawk, "Engineered Wood Care and Maintenance," a manufacturer care page covering steam mops, flood mopping and cleaning. mohawkbuild.com
  4. Manufacturer guidance differs by product, especially on vinegar. This is general advice, not a warranty. Always follow the care instructions for your specific floor, and test any new product in a hidden spot first.

Ready to Get Started?

Contact Kelly's Flooring for a no-obligation estimate on your flooring project.